Motorola Model Rln5869c Manual
Motorola Battery Charging Indicators Charge Indicator Description Single Flash Green Charger has successfully powered up Steady Red Battery is in rapid charge mode Flashing Green Battery has completed rapid charge (>90% available capacity). 2018 Opel Corsa Utility Service Manual on this page. Battery is in Top-Off charge (Trickle charge) Steady Green Battery has completed charging and is fully charged Flashing Yellow Battery is recognized by charger but is waiting to charge.
Motorola Model Rln5869c Manual hunting for Motorola Model Rln5869c Manual do you really need this pdf Motorola Model Rln5869c Manual it takes me 13 hours just to obtain the right download link, and another 4 hours to validate it. Internet could be.
(Either the battery voltage is too low or the battery temperature is too low or too high to allow charging. When this condition is corrected, the battery will automatically begin charging.) Flashing Red Battery is unchargeable or not making proper contact Steady Yellow (IMPRES batteries only) Battery is in recondition or initialization mode. The length of time the charger remains in this mode depends upon the state of charge remaining in the battery when inserted.
(Fully charged batteries require more time to recondition – 8 to 12 hours or more – than fully discharged batteries.) Flashing Red/Green (IMPRES batteries only) Battery has completed charging and is fully charged. Battery continues to be usable, but may be nearing the end of its rated service life.
Battery Initialization In order for the features of Motorola and the Adaptive Charging System to be fully available, the data contained in Motorola IMPRES batteries must be initialized by the charger the first time it is charged. This process is indicated by a STEADY YELLOW light on the charger indicator (the same as if the battery were reconditioning). The process is automatic, includes an initial reconditioning of the battery, and begins charging upon completion of this process. This process requires time to initialize the battery, so the battery should be left in the charger for approximately 12 hours to complete the process. Do not remove the battery from the charger until the STEADY GREEN light is on. Automatic Reconditioning The Motorola, when used in conjunction with a Motorola IMPRES battery, has the ability to determine when it is appropriate to recondition the battery (required to remove memory issues in IMPRES batteries). When an IMPRES battery is properly inserted into the charger, the charger determines if it is appropriate to recondition the battery.
If the battery needs reconditioning, the charger automatically indicates a STEADY YELLOW. This process may take up to 12 hours to complete, depending upon the state of charge and capacity rating of the battery when it is inserted. It is important to note, for this process to be effective, the IMPRES battery must be allowed to complete the recondition/recharge process. Leave the battery in the charger until the charger indicates a STEADY GREEN. At the completion of the recondition cycle, the charger automatically recharges the IMPRES battery.
Manually Terminating the Reconditioning Process At any time during the reconditioning process of a Motorola IMPRES battery (STEADY YELLOW indication), reconditioning may be terminated by removing and reinserting the battery back into the charger within 5 seconds. This causes the charger to terminate the reconditioning process and begin the charging process. The charger indicator changes to a STEADY RED. The charger will attempt to recondition the battery at the next battery insertion. Manually Initiating the Reconditioning Process Within 2-1/2 minutes of the initial insertion of an IMPRES battery (STEADY RED indication), remove and reinsert the battery within 5 seconds to manually force reconditioning to occur. The charger indicator changes from a STEADY RED to a STEADY YELLOW. This forces the charger to recondition and automatically recharge the battery.
This is a useful feature to have when IMPRES batteries have been in storage for several months or longer. Two or three manual recondition cycles may be required to rejuvenate the batteries, due to long term storage conditions.
Due to the FCC Narrowbanding mandate in the United States, product specifications and brochures for Motorola Solutions two-way radio products may indicate 25 kHz/12.5 kHz analog/digital operation which may not be the standard mode of operation at the time of shipment after Jan. Wide and narrow-band programmable channel spacing Available on VHF and UHF models only. Expanded stored voice Records up to 8 minutes of voice message for playback. Silent scan (Dual-frequency model) Scans both channels silently, alerts on either channel.
Priority scan (Dual-frequency model) Plays all trafﬁc on Channel 2, alerts on Channel 1. 12 alert tones per channel Supports 8 two-tone pairs and 4 individual long-tone alerts. Programmable Alerts Supports 10 different musical alerts. Function mode announcement (Stored Voice option) Announces programmed operating mode. Certified for hazardous locations Sealed and sturdy for rugged conditions.
- by admin